All guides
Getting started

Install a Vera script from your browser

The exact connect, slot, flash, and console handoff sequence for every current script.

5 min read

Before connecting

  • Use current Chrome or Edge.
  • Close Zen Studio and any other browser tab connected to the device.
  • Use firmware 2.3.0 or newer. The current shipped release records explicitly validate 2.3.0 and 2.3.1; firmware 2.2.14 is below the Vera writer minimum.
  • Use the Zen's right-side programming port and a data cable.

Install

  1. Sign in at verascripts.com with the Discord account linked to your purchase.
  2. Open Dashboard or Flash and choose the script.
  3. Click Connect, then select Cronus Zen in the browser device picker.
  4. Review the empty slot selected by the installer. If every slot is occupied, clear one in official Zen Studio first.
  5. Click Install and leave the Zen connected until the site says the flash completed.
  6. Confirm the Zen OLED shows the script name, then unplug it from the computer.
  7. Connect the Zen to the console, connect the controller, and test the dashboard before opening the game.

What success means

A completed browser message and a readable script name on the OLED prove the payload was written. A working controller on the console dashboard proves the console/controller path is correct. The first in-game test proves the selected game settings match the script.

Do not unplug during the write. Do not run Zen Studio and the Vera flasher at the same time.